基于UG的喷注器冷却通道的机床仿真加工

在分析了喷注器壳体上冷却通道的结构特点和数控加工工艺的基础上,利用UG／ISV软件进行冷却通道的辅助加工,同时对喷注器三维模型的建立、加工过程参数的选用及刀具轨迹编程和加工仿真进行了详细介绍,并用五轴机床进行了加工实验,保证了加工质量,提高了加工效率。     

LEO/MEO双层空间信息网中基于身份的群组密钥管理方案

由于空间信息网中结点的移动性,在空间信息网中实现传统的群组密钥管理面临许多困难.根据空间信息网的特点,分析了空间信息网中群组密钥管理方案的需求,设计了一个适用于LEO/MEO双层空间信息网络的群组密钥管理方案,采用基于身份的思想,消除了对证书系统的依赖,能在空间信息网中灵活高效地实现.将空间信息网中的结点根据其逻辑位置划分为簇,其中簇头为MEO卫星,在密钥交换阶段中共享密钥仅由所有簇头结点决定,这种机制大大减少了通信量.方案能有效抵抗外部攻击者,并且具有前向保密性和后向保密性.仿真实验表明,方案具有很高的通信效率.     

星载蓄电池组软件V/T充电控制技术研究

蓄电池组作为整星的储能部件,其充放电循环寿命是制约整星寿命的重要因素之一。适当的充电控制手段能有效地延缓蓄电池性能的衰降,延长卫星的使用寿命。文章分析了目前基于硬件模拟电路的蓄电池电压/温度（V/T）曲线充电控制技术的特点和局限性,提出了一种采用电源控制计算机软件实现的V/T曲线充电控制方法,其针对蓄电池可能出现的开路...     

三维编织复合材料热物理性能的有限元分析

根据三维编织复合材料的细观结构,分别建立了三维四向和五向编织复合材料热物理性能的有限元模型.采用周期性的非绝热温度边界条件和位移边界条件,计算了三维四向和五向编织复合材料的整体等效热传导系数和热膨胀系数,计算结果同已有文献相比与实验值符合得更好.在此基础上,迸一步研究了编织角、纤维体积分数、编织结构等参数对材料热物理性...     

"回收/调节"方法在混合LES/RANS模拟方法中的应用

采用一种混合大涡模拟/雷诺平均Navier-Stokes(LES/RANS)模拟方法结合三阶加权基本无振荡(WENO)格式对马赫数为2.88的压缩斜坡流动进行了数值模拟,并采用"回收/调节"方法生成入口湍流脉动边界条件.当采用固定入口边界条件时,湍流边界层会缺乏合理的湍流能量,使之抵抗逆压梯度的能力减弱,会严重高估分离...     

冲击＋同向对流＋气膜冷却的三维壁温计算与分析

采用Fluent 6.3软件对冲击＋同向对流＋气膜冷却结构的壁温进行了流固耦合传热计算,获得了该复合冷却结构的壁温和冷却效果分布规律,并将计算结果与试验结果进行了对比.结果表明：冲击＋同向对流＋气膜冷却具有壁温分布均匀、冷却效果好等优点.计算结果与试验结果的分布趋势一致,最大相对误差为3.6%.     

可调高压导叶对1＋1/2对转涡轮性能影响的数值研究

对1＋1/2对转涡轮高压导叶转动不同角度后不同落压比时的涡轮性能进行了数值计算和分析,获得了不同导叶开度和不同落压比对涡轮性能影响的关系曲线.结果表明,高压导叶转角的变化可以有效地调节1＋1/2对转涡轮的流量;当导叶打开时,随着落压比的变化涡轮效率存在一个峰值,当导叶关闭时,涡轮效率随落压比的减小持续降低,并且降低的幅...     

Control-oriented Modeling for Air-breathing Hypersonic Vehicle Using Parameterized Configuration Approach

This article presents a parameterized configuration modeling approach to develop a 6 degrees of freedom (DOF) rigid-body model for air-breathing hypersonic vehicle (AHV). The modeling process involves the parameterized configuration design, inviscous hypersonic aerodynamic force calculation and scramjet engine modeling. The parameters are designed for airframe-propulsion integration configuration, the aerodynamic force calculation is based on engineering experimental methods, and the engine model is acquired from gas dynamics and quasi-one dimensional combustor calculations. Multivariate fitting is used to obtain analytical equations for aerodynamic force and thrust. Furthermore, the fitting accuracy is evaluated by relative error (RE). Trim results show that the model can be applied to the investigation of control method for AHV during the cruise phase. The modeling process integrates several disciplines such as configuration design, aerodynamic calculation, scramjet modeling and control method. Therefore the modeling method makes it possible to conduct AHV aerodynamics/propulsion/control integration design.     

Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

高超声速飞行器机体/推进一体化设计的启示

机体/推进一体化设计是吸气式高超声速飞行器的关键技术。飞行器的前体和后体既是主要的气动型面,又是发动机进气道的外压缩型面和尾喷管的膨胀型面,一体化设计直接影响飞行器的气动与发动机性能。本文阐述了吸气式高超声速飞行器的主要特点,梳理了飞行器的推阻匹配、升阻比特性、操稳匹配等主要气动设计问题。通过对国外典型高超声速飞行器机体/推进一体化设计技术的综合分析,总结了前体/进气道、后体/尾喷管、边界层强制转捩装置等关键部件的气动设计方法,获得了有意义的启示,可为后续吸气式高超声速技术研究提供重要参考。